|
Blue Fin Quality Aluminium Heavy Duty Dinghies.
The "OPEN DINGHIES" models range between 4.5 m and 5.0 m, with further Heavy Duty Dinghies from 3.0 - 4.2m .
The Blue Fin open Dinghies range give you size variation, affordability, with quality, safety and comfort a priority |
|
The new 42 Scoundrel is an tough little open boat, built to take on the everyday conditions of river, estuary and impoundment fishing. With a 3mm bottom and fully gusseted under floor, combined with rigid side decks the Scoundrel will get you out there and back safely.
There is plenty of uncluttered space in the boat and storage underneath the raised casting deck . There are 5 seat positions through the boat making it easy to set up for fishing or general boating. The Scoundrel comes complete with front and back rails, transom step, side pockets, rod holders, bilge pump bracket, nav light brackets and transducer bracket. The boat is unpainted as standard but is available painted with decals, in any of our range of colours. See your dealer for information on a factory fitted wiring harness, Sunbrella bimini and MinnKota electric motor and Humminbird sounder packages. Other factory options include electric motor bracket and spray chines making the Scoundrel a great all round boat.
|
|
Our Vee Bow Punts range comprises of two models the " TREKKER and "ESTUARY TREKKER ".
The " TREKKER " models range between 2.85m and 4.30m with our "ESTUARY TRAKKER" range from 3.95m to 4.3m. Our "ESTUARY TREKKER" range features carpeted Full Floors and wide side decks in larger models.
The Blue Fin Vee Bow Punts range give you size variation, affordability, with quality, safety and comfort a priority |
|
Like it's namesake this tough no nonsense sports fishing boat is at home in estuary and inshore waters. Its traditional hull provides a soft ride combined with outstanding stability at rest. The Mangrove Jack comes with a front and rear casting platform and is available in tiller steer or side console options.
|
|
The 4.35 Wildcat is built with great attention to detail and, with 3mm sheet used for both bottom and topsides, it is more then tough enough to withstand the bangs, knocks and vibrations that are the reason why we buy tinnies in the first place.
It is an exceptionally well-built boat, fairly easy to power and does not need a lot of horespower for good performance.
A very stable boat for fishing with a big console, a full height aft bulkhead, storage underneath the forward deck, a big, wide, uncluttered deck and a pair of pedestral seats with appropriate mountings strategically placed including one on the casting deck. The bow is set up to make anchoring easy! |
|
The plate sided, tiller steered Warrior is designed to give the more adventurous boater the ability to access the variety of coastal waterways and inland river systems found throughout Australia.
"The warrior is massive for it's length, having a width of 2.15m, which makes it one of the widest alloy boats, for its length, in the country. The higher then average sides, which are 1.1 m overall, with a 0.6m gunwale height, give a really safe & secure look and feel to the rig. For people like myself who have sat in the middle of croc infested streams in the north, in a low sided punt, and imagined a saurian crawling over the side, the extra high sides makes for a good nights sleep". (Garry Smith)
|
|
The stylish side console adds a greater level of comfort that enables the Predator to appeal to the family and the fisherman alike. Carpeted floors and upholstered seats together with the casting platforms for and aft make it a very versatile boat.
"Stylish and tough, the Predator from Blue Fin Boats was found to convert extremely well to the tournament style but wasn't limited to just this style of fishing. 3mm plate side alloy bottom and sides with 22 ribs and a wide gun'l shows that this boat is built tough. It is certainly overbuilt for an estuary fishing machine with 400 kgs of dry weight hull but it would have to rate as the most rigid boat in its class." (Mark Ward - Fishing World Great Boat Guide). |
|
Offshore fishing grounds are now as easily accessed as your local waters with the stylish and practical Barracuda. The full pod, plate sided, side console boat has a raised casting platform up forward with plenty of storage underneath.
"A quick look over the Barracuda and you don't need to be Einstein to appreciate that this hull is built very strongly. 3mm topsides and 3mm pressed bottom, decks and transom, and ribs every 300mm approx. make it a very rigid and strong hull - perfect I would suggest, for a boat that is equally at home in open sea as well as estuary situations". (Barry Tyler - The Australian Propeller Magazine) |
|
The plate sided, tiller steered Trooper is designed to give the more adventurous boater the ability to access the variety of coastal waterways and inland river systems found throughout Australia.
|
|
The 4.75 Tomcat is built with great attention to detail and, with 3mm sheet used for both bottom and topsides, it is more then tough enough to withstand the bangs, knocks and vibrations that are the reason why we buy tinnies in the first place.
It is an exceptionally well-built boat, fairly easy to power and does not need a lot of horespower for good performance.
A very stable boat for fishing with a big console, a full height aft bulkhead, storage underneath the forward deck, a big, wide, uncluttered deck and a pair of pedestral seats with appropriate mountings strategically placed including one on the casting deck. The bow is set up to make anchoring easy! |
|
Developed for our dealer in the Northern Territory the 4.75m Wrangler is a versatile sports fishing boat available inan unpainted "territory tough" version or painted in any of the colours in our range. The sports console is mounted in the centre of the boat with two seating positions in front of the console and behind the casting deck. A side console version is also available as an option. The casting deck has one access hatch and a plug in seat base mounted on it. The Wrangler is standard with 3mm sides and bottom sheets and is available with a 4mm bottom upgrade that will take the horse power rating to 90Hp from the standard 80HP. The boat has a full pod and has a range of options available.
|
|
Blue Fin Boats has once again shown why they are market leaders in the sports fishing field with the addition of the new 5.45mtr Hellcat to their range of boats.
Rated to 175HP this exciting new boat broke new ground for the company with the development of the 4mm plate hull that features a finer entry angle to complement the existing hull refinements that are inherent in their sports fishing designs.
Built tough this top of the range tournament boat has all of the trimmings expected in a well set up competition boat and includes twin sports consoles , honeycomb aluminium deck hatches with 316 stainless steel piano hinges and stainless steel deck hardware, plush hook less carpeting and deluxe racing style seating, rod locker and ample tackle storage in both the front and rear casting decks, a 140ltr live well fitted with a Flowrite Tournament Pro live well system featuring twin circulation pumps.
Set up for the serious recreational angler or Bass, Bream or Barra competitor, the Hellcat has an angled front sounder mount, electric motor pedal recess and electric motor bracket as standard and is pre wired at the factory ready for fit-up. The factory fitted wiring harness has a dual voltage system, BEP battery switches and BEP Contour Generation 2 splash proof switch panels.
The finish and attention to detail is complemented with racy decals and two pack paint work available in the colour of your choice
|
|
Blue Fin Cobia Plate sided boat
The Blue Fin Quality Aluminium Plate sided boat: affordability, with quality, safety and comfort a priority.
Available in big range of colours.
|
|
|
